banner

Products

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic vials with Multi Codes Self-Standing Low Temperature St
SHARE

Description

Basic Info
Model NO. 88-620x
Capacity 2ml
Type 2.0ml Cryogenic Vials
Made of PP Cryogenic Vials
Sterile Gamma Sterile Tubes
Dnase and Rnase Free Dnase and Rnase Free Tubes
Bottom Self-Standing
Autoclavable Autoclavable
Thread External Thread
Tube Color Clear
Cap Color White Red Green Blue Yellow Purple Clear
Polypropylene Polypropylene Cryogenic Vials
Transport Package 25 Pieces/Bag, 20 Bags/Pack, 2 Packs/Case
Specification 2.0ml Cryovial Tubes
Trademark Biologix
Origin China
Production Capacity 1000000 Cases/Month
Product Description

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Features:

1. Made of medical grade polypropylene; can be repeatedly frozen and thawed

2. 2.0ml cryogenic vials are available with either internal or external screw threads

3. External thread vials' caps lack o-rings, which reduces the possibility of contamination

4.DNase & RNase free, endotoxin free, foreign DNA free

5. With side barcode and digital code by Side laser printing, easy for information storage

6. Working temperature: stable from -196°C to 121°C

7. Suitable for liquid nitrogen freezing

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

Ordering Information
Cat #TypeSide BarcodeBottom

Writing

Area

SterileColorUnit
88-6200

External

Thread

YesSelf-StandingYesYesWhite25 Sets/Bag, 40 Bags/Case
88-6201

External

Thread

YesSelf-StandingYesYesRed25 Sets/Bag, 40 Bags/Case
88-6202

External

Thread

YesSelf-StandingYesYesGreen25 Sets/Bag, 40 Bags/Case
88-6203

External

Thread

YesSelf-StandingYesYesBlue25 Sets/Bag, 40 Bags/Case
88-6204*

External

Thread

YesSelf-StandingYesYesYellow25 Sets/Bag, 40 Bags/Case
88-6205

External

Thread

YesSelf-StandingYesYesPurple25 Sets/Bag, 40 Bags/Case
88-6207

External

Thread

YesSelf-StandingYesYesClear25 Sets/Bag, 40 Bags/Case

*Call for information

Laboratory Disposable Plastic PP 2.0ml External Thread Cryogenic Vials with Multi Codes Self-Standing Low Temperature Storage Ln Storage

What are the main factors that influence the maximum centrifugal acceleration force?
Use of organic solutions, temperature below 0°C, centrifuging without centrifuge adapter, etc. Conduct a trial run to determine proper conditions before any critical use begins.
The RCF (relative centrifugal force) or G ratings for our disposable centrifuge tubes have been established at room temperature using tubes filled to nominal capacity with water and centrifuging for 30 minutes. recommended carriers, adapters, and cushions that fully support the tubes. If an angle head rotor is used or proper support is not provided, G values will be lower.
Do not confuse speed or revolutions per minute (RPM) with relative centrifugal force (RCF). Instructions for centrifuging a sample at a given RPM and time are incomplete unless the rotor or radius is specified. Protocols should always state the time and RCF value for centrifuging a sample.
What are autoclaving guidelines of plastics?
To ensure successful steam sterilization of your plastic labware please adhere to the following guidelines: PLEASE NOTE THAT NOT ALL PRODUCTS ARE AUTOCLAVABLE. Autoclave plastic consumables at 121°C and 15psi/1 atm for 15 minutes. Do not use a dry cycle, as this may cause deformation or weakening of the plastic. Allow temperature within the autoclave to return to 80°C or below before removing products.
What are Biologix's Commitments to Quality?
We look at quality from every angle in terms of functionality, safety, purity, formulation, consistency, manufacturing, customer service, technical support, and much more. According to the detailed QA/QC procedures for our manufacturing facility, each and every product is traceable by lot, regardless of packaging format. Products must go through a five-step human inspection before being released for packaging. Biologix applies the most stringent standards to certify that products are free from RNase, DNase, endotoxin (pyrogens), etc. In addition to being ISO 9001:2008, CE compliant, we also make available to our customers lot-specific certificates such as Sterilization Certificates, Nuclease Free Certificates, Certificates of Origin, etc.

Our Contact